Stirrer Accessories
Ace Glass, Inc. Stirring shaft, 19mm, 48in, hollow glass, polished, knob type
Stirring shaft, 19mm, 48in, hollow glass, polished, knob type
Ace Glass, Inc. PTFE banana stir blade, 31x157mm, 3L flask size, 10mm shafts
31X157MM PTFE STIR BLADE
Ace Glass, Inc. Stir blade, stainless, 24x115mm, holed, 10mm shaft
Stir blade, stainless, 24x115mm, holed, 10mm shaft
Buehler AcuThin Blade, >HRC45, 12in [305mm]
The AcuThin series offers thin blades that have been developed to minimize the area of cutting thus reducing the amount of damage to the sample. These blades allow for precise, delicate abrasive sectioning with minimal surface damage.
Chemglass Life Sciences Stirrer Assembly, Macro, Chem-Stir, 19mm x 75mm Blade Fits 500mL-5L Flask, 29/42 Bearing, 10mm OD x 445mm Stirrer Shaft
Stirrer Assembly, Macro, Chem-Stir, 19mm x 75mm Blade Fits 500mL-5L Flask, 29/42 Bearing, 10mm OD x 445mm Stirrer Shaft. Assembly consists of a 10mm OD Chem-Stir™ stirrer shaft, a precision bore-bearing having a standard taper inner joint and a PTFE blade. The blade is sized to fit the listed flask capacities.
Chemglass Life Sciences 10mm Stirrer Shaft Coupling, Universal, 1/4" OD Stud
10mm Stirrer Shaft Coupling, Universal, 1/4" OD Stud. Coupling incorporates a universal joint to compensate for misalignment of drive motor and glass stirrer shaft. Nylon bushing compresses around shaft using an allen screw. Stainless steel stud attaches directly to the chuck of a stirrer motor. Supplied complete with an allen wrench.PLEASE NOTE: OTHER THAN OUR CG-2097 PROCESS REACTOR STIRRER SHAFTS, CHEMGLASS 19MM OD STIRRER SHAFTS HAVE A REDUCED TOP DIAMETER OF 12.7MM. WHEN ORDERING A UNIVERSAL COUPLING FOR A CHEMGLASS 19MM OD STIRRER SHAFT, USE PART NUMBER CG-2046-03.
Chemglass Life Sciences 19mm Stirrer Shaft Coupling, Universal, 3/8" OD Stud
19mm Stirrer Shaft Coupling, Universal, 3/8" OD Stud. Coupling incorporates a universal joint to compensate for misalignment of drive motor and glass stirrer shaft. Nylon bushing compresses around shaft using an allen screw. Stainless steel stud attaches directly to the chuck of a stirrer motor. Supplied complete with an allen wrench.PLEASE NOTE: OTHER THAN OUR CG-2097 PROCESS REACTOR STIRRER SHAFTS, CHEMGLASS 19MM OD STIRRER SHAFTS HAVE A REDUCED TOP DIAMETER OF 12.7MM. WHEN ORDERING A UNIVERSAL COUPLING FOR A CHEMGLASS 19MM OD STIRRER SHAFT, USE PART NUMBER CG-2046-03.
Chemglass Life Sciences Stirring Shaft, PTFE Covered SS, 625mm OAL, 4-Blade, 127mm OD Blades, High Viscosity Style, Fits 3-5L Reactors
Stirring Shaft, PTFE Covered SS, 625mm OAL, 4-Blade, 127mm OD Blades, High Viscosity Style, Fits 3-5L Reactors. 16mm O.D. shaft is constructed using a molding process whereas the blade is molded directly onto the PTFE coated stainless steel shaft. This makes the stirrer chemically inert, easy to clean and can be used up to 280°C. The top of the shaft has 50mm of exposed 1/2" diameter stainless steel for rigid clamping to a coupling such as CG-2044-02, CG-2044-05 or CG-2046-03.Note: Shaft must be used with CG-2077-U or CG-2077-M style bearing
Chemglass Life Sciences Rushton Style Impeller Blade for 2-3L Bio Reactors, 46mm Dia for 8mm OD Shaft
This adapter can be used to add fluids or gases to the bio reactor.The portion of the adapter that is within the reactor has a short drip tip tube that can accept tubing to reach further into the listed capacity reactor.Stainless steel components manufactured from 316L with an electropolished surface finish of 20Ra or better.Like-for-like replacement parts for Applikon Biotechnology and Broadley-James brands of bioreactors.Applikon is a registered trademark of Applikon Biotechnology, Inc.Broadley-James and Broadley-James Corporation are registered trademarks of Broadley-James Corporation.
Chemglass Life Sciences Optional 25.4mm Stirrer Shaft, Reactor Size: 50L (Tall), Fits Support Frame: CG-1968-F-14, Overall Length: 48.2"
25.4mm Stirrer Shaft, Reactor Size: 50L (Tall), Fits Support Frame: CG-1968-F-14, Overall Length: 48.2". Precision ground and polished stirrer shaft for use with Chemglass process reactors. Designed to utilize CG-2095 and CG-2096 PTFE agitators. Lower portion of stirrer shaft is sandblasted and has a 3/8¿ wide flat. REPLACEMENT STIRRER SHAFTS ARE FOR USE WITH MECHANICAL SEAL STIR BEARING ON LISTED SUPPORT FRAME.
Chemglass Life Sciences Optional 25.4mm Stirrer Shaft, Reactor Size: 30L, Fits Support Frame: CG-1968-F-12, Overall Length: 38.4"
25.4mm Stirrer Shaft, Reactor Size: 30L, Fits Support Frame: CG-1968-F-12, Overall Length: 38.4". Precision ground and polished stirrer shaft for use with Chemglass process reactors. Designed to utilize CG-2095 and CG-2096 PTFE agitators. Lower portion of stirrer shaft is sandblasted and has a 3/8¿ wide flat. REPLACEMENT STIRRER SHAFTS ARE FOR USE WITH MECHANICAL SEAL STIR BEARING ON LISTED SUPPORT FRAME.
